Mitsubishi Electric MELSEC Q Series User Manual page 492

9 TROUBLE SHOOTING
Error
Error name
code
06A0h
06A1h System error
06A2h
06A3h Rename error
06A4h
06A5h
06A6h
06A7h
06A8h
System error
06A9h
06AAh
06ABh
06ACh
06ADh
Out-of-range argument
0700h
error
0701h Invalid argument error
0703h No specified file error
0704h Send queue full error
Incorrect file name
0705h
error
Simultaneous multiple
0709h
access error
070Bh File open error
9 - 37
Error definition
Failed to change (rename) a
logging file into the saved file.
The argument outside the range
was specified in the dedicated
instruction.
The tag No., logging No., e-mail
address No. or FTP transfer
destination No. specified with the
argument in the dedicated
instruction does not exist.
The file specified in the dedicated
instruction does not exist.
The queue for e-mail or FTP has
become full.
The file name includes
inapplicable characters.
An attempt was made to access
the file being used by the other
instruction.
Failed to create a file.
(From the previous page)
Corrective action
 System error ( 1)
 By FTP operation (refer to
Section 6.7), delete unnecessary
files to secure a free space in the
standard ROM or CF card.
 Check the CF card. (Refer to
Section 9.1 (9).)
 System error ( 1)
 Specify an argument in the
correct range.
 Specify existing setting No.
 Specify the existing file.
 Reduce the frequency of e-mail
or FTP transmission.
 Check the control data of the
dedicated instruction.
 Provide interlocks between the
instructions that will access the
same file.
 Change the access target file
name.
 Check whether the CF card has
a USER folder.
 Check whether the USER folder
of the CF card is write enabled.
(Continued on the next page)
MELSEC-Q
Error type
Stop
Continue
Continue
Continue
Stop
Stop
Continue
Continue
Continue
Display
Stop
Continue
Continue
Stop
Display
Display
Display
Display
Display
Display
Display
9 - 37