Mitsubishi Electric MELSEC Q Series User Manual page 508

APPENDICES
Network communication
route
CC-Link
C24
App - 4
Web server
module
Request
source
The following lists CPU modules that can be used on the network communication route.
Request source
Access target CPU
QCPU (Q mode) RCPU
( 7) ( 10)
1 As the network number and station No., set the parameter values set for the Q series-
supported E71, QE71, L series-supported E71 or R series-supported E71 on the
access target CPU side.
Also set the "Station No. <-> IP information" parameter of the Q series-supported E71,
QE71, L series-supported E71 or R series-supported E71.
In this case, specify any of "IP address computation system", "Table exchange
system", and "Use-together system" in "Station No. <-> IP information system".
2 Use the QnACPU or QE71 whose number is on or later than the manufacturing date
(9707B) on the access target CPU side.
3 Use a CC-Link system master/local module of software version "S" or later on the
access target CPU side.
4 Use the Web server module whose serial No. (first five digits) is 14022 or later.
5 Use the Universal model QCPU whose serial No. (first five digits) is 12012 or later.
6 When the control CPU for the access target network module is a C Controller module,
the Web server module can access the control CPU only.
7 Use a QCPU (Q mode) or RCPU as a control CPU for the access target network
module.
8 To access a programmable controller CPU through Ethernet, use an Ethernet module.
Built-in Ethernet ports of the programmable controller CPU cannot be used.
9 When the access target CPU is Q12DCCPU-V, the access is not possible.
10 Use the Web server module whose serial No. (first five digits) is 16072 or later.
11 When the Network communication route is NET/10(H), the access is not possible.
Network
module
Access target CPU
Network
communication
route
Use a QCPU (Q mode) or RCPU as a control CPU for the Web server
module and network module.
For accessible CPU modules, refer to the following.
Access target CPU (PLC series)
LCPU QnACPU
( 3)
MELSEC-Q
C24 multidrop
CC-Link
QCPU (A mode), C Controller
ACPU module
( 3)
: Accessible : Inaccessible
App - 4
( 6)