Mitsubishi Electric MELSEC Q Series User Manual page 533

APPENDICES
Label
3 IPADDRESS
4
SUBNET
5
GATEWAY
6
DNSTYPE
7
DNS1
8 DNS2
9
HTTPTYPE
10
HTTPPORT
11
HTTPNAT
12 FTPTYPE
App - 29
Description
When "AUTO" is selected at
IPTYPE
IP address
When "SPECIFY" is selected at
IPTYPE
When "AUTO" is selected at
IPTYPE
Subnet mask
When "SPECIFY" is selected at
IPTYPE
When "AUTO" is selected at
IPTYPE
When "SPECIFY" is selected at
Default gateway IPTYPE and "GATEWAY" is
selected at DESTINATION
When other than the above is
selected
Obtain a DNS server address
automatically.
DNS server
setting
Use the following DNS server
address.
When "AUTO" is selected at
DNSTYPE
DNS server
address 1 When "SPECIFY" is selected at
DNSTYPE
When "AUTO" is selected at
DNS server DNSTYPE
address 2
When "SPECIFY" is selected at
DNSTYPE
Use the default HTTP port
number (80).
Web server
setting
Use the following HTTP port
number.
When "DEFAULT" is selected at
HTTPTYPE
HTTP port
number
When "SPECIFY" is selected at
HTTPTYPE
Register the
Mark
above port No.
to the router's
Do not mark
NAT.
Use the default FTP port number
FTP server (21).
setting
Use the following FTP port
number.
Set value
(Blank)
IP address (decimal)
(Blank)
Subnet mask (decimal)
(Blank)
Default gateway (decimal)
Default gateway (decimal) or
(blank)
AUTO
SPECIFY
(Blank)
DNS server address 1
(decimal) or (blank)
(Blank)
DNS server address 2
(decimal) or (blank)
DEFAULT
SPECIFY
(Blank)
1024 to 65535
YES
NO
DEFAULT
SPECIFY
: Must be set : Need not be set (Invalid)
MELSEC-Q
Setting
requirement
App - 29