Mitsubishi Electric MELSEC Q Series User Manual page 320

6 FUNCTIONS
6 - 97
(2) Setting procedure for FTP client function
(a) Common procedure
The common procedure required to use the FTP client function is indicated
below.
Start
Make access target CPU setting on the Access target
CPU setting.
For use of DNS server, make the DNS setting on the
System setting.
Make the required setting for file transfer to FTP
sever on the FTP setting.
(b) Procedure for transferring (PUT) file by programmable controller CPU
1)
Collect the tag data or logging data to be transferred
by dedicated instruction (FTPPUT).
Create a sequence program (FTPPUT instruction).
Completed
(c) Procedure for transferring (GET) file by programmable controller CPU
1)
Create a sequence program. (FTPGET instruction)
Completed
(d) Procedure for transferring file by logging function
1)
Make the setting on the Logging setting so that a file
will be transferred when it is saved.
Completed
(e) Procedure for transferring file by diagnostics function
1)
Execute file transfer test on the System setting.
Completed
1)
MELSEC-Q
Refer to
Section 4. 6.
Refer to
Section 4. 6. 3.
Refer to
Section 6. 7. 3.
For tag function, refer
to Section 6. 3.
For logging function,
refer to Section 6. 4.
Refer to Section 8. 3.
Refer to Section 8.4.
For logging function, refer to
Section 6. 4.
For details of file transfer test, refer to
Section 6. 11. 2.
6 - 97