Mitsubishi Electric MELSEC Q Series User Manual page 193

4 SET-UP AND PROCEDURE BEFORE OPERATION
CompactFlash card slot
CompactFlash card slot
4 - 69
EJECT button
Orientation of
CompactFlash
card
(c) Lower the LED cover until it clicks.
When the CompactFlash card is set, the CompactFlash card slot cover
cannot be attached to the Web server module.
Save the removed CompactFlash card slot cover carefully.
(4) Removing CompactFlash card
(a) Open the LED cover, which is situated on the Web server module front, and
remove the CompactFlash card slot cover.
EJECT button
1) Put your finger at the bottom of the LED cover and lift the LED cover
open.
LED cover
Insert in
this direction
LED cover
MELSEC-Q
Pawl position
CompactFlash card
EJECT button
Push
Remove in
this direction
CompactFlash card
4 - 69