Mitsubishi Electric MELSEC Q Series User Manual page 520

APPENDICES
Added/Changed Function
Logging monitor
Self-diagnostics monitor
Tag setting
Logging setting
Event setting
E-mail setting
Address notification setting
E-mail notification setting
FTP notification setting
Data management
App - 16
 The following items were added.
1) "Open file" button
2) The "Points" pull-down menu was added to the graph display
 A change was made to automatically set the upper and lower scale
values.
 A change was made not to display the last update time of the file in
the file specifying field.
When it is desired to display the last update time of the file, make
logging monitor setting. (Refer to Section 4.7 (2).)
 This monitor screen was added.
 The "Execute at high speed" radio button was added to the
sampling setting.
 The following setting items were added.
1) The "Same as the tag sampling interval" radio button was added
to Timing.
2) "Condition for Start" and "Condition for Stop"
3) "Saved file names"
 The following setting items were changed.
1) "Logging specification, Time/Interval" was changed to "Timing".
 The following setting items were added.
1) "Send to" was added to Mail setting for event occurrence.
2) "Disconnect from the network after sending mail" was added to
Mail setting for event occurrence.
 The following setting items were changed.
1) The No. of CPU event historical data was changed from 16 to 64.
2) The No. of tag event historical data was changed from 16 to 256.
3) From the common setting, E-mail destination specification were
moved to the CPU event setting, Tag event setting and
Time/Interval event setting. The number of e-mail destinations
was changed from "Within 3 common destinations" to "Within 16
destinations for each event setting screen".
4) A change was made to enter the "Trigger value, Restoration
value" of the tag event setting according to the data type.
 "Option setting" was added.
 The "Notify the global IP address obtained from the router" radio
button was added.
 "Use the default HTTP port number (80)" was changed to "Notify the
HTTP port number set in the "System setting" screen".
 "Notify an IP address at dial-up" was changed to "Notify an IP
address at network connection.".
 "Option setting" was added.
 "Notify an IP address at dial-up" was changed to "Notify an IP
address at network connection.".
 "CSV export, CSV import" was added.
Description
MELSEC-Q
(From the previous page)
Reference
Section
Section 6.2.3
Section 6.2.6
Section 6.3.3
Section 6.4.4
Section 6.5.3
Section 6.6.3
Section 6.9.2(1)
Section 6.9.2(2)
Section 6.9.2(3)
Section 6.10.4
(Continued on the next page)
App - 16