Mitsubishi Electric MELSEC Q Series User Manual page 182

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 58
(2) Default operation setting/Battery error detection setting/Logging
monitor setting/Access log (HTTP login) registration inhibit setting
(switch 2)
Select the default operation setting/battery error detection setting/logging monitor
setting/access log (HTTP login) registration inhibit setting for the Web server
module.
(a) Default operation setting (bit 0, 1)
For the account setting, system setting and IP filter setting, whether the
default setting is enabled or not is set in this setting.
1) Account setting (bit 0)
0 : Operates according to the account setting.
1 : Operates according to the default setting.
2) System setting and IP filter setting (bit 1)
0 : Operates according to the system setting/IP filter setting.
1 : Operates according to the default setting.
POINT
Use the default setting when changing the setting of the Web server module
connected with the personal computer on a one-to-one basis.
MELSEC-Q
4 - 58