Mitsubishi Electric MELSEC Q Series User Manual page 170

4 SET-UP AND PROCEDURE BEFORE OPERATION
4 - 46
(e) Initial screen
1) The initial screen can be set to be displayed when the address
"http://IP address" of the Web server module is specified from the Web
browser.
Make this setting when it is desired to change the top page of the
standard screen (refer to Section 4.6.1) to a user-specified screen.
[Setting item]
Item
Top page (/index.htm)
User-specified screen
2) When "User-specified screen" has been selected, set the address of
the user screen to be displayed. (1 to 64 characters) ( 1) ( 2)
 User screen of standard ROM
(Example) /USER/xxxx.htm
 User screen of CompactFlash card
(Example) /CF/USER/xxxx.htm
1 When the specified file does not exist, the top page of the standard
screen is displayed.
2 To display the top page of the standard screen at the time of login using
the account for which the user-specified screen is selected, specify
"http://IP address/index.htm" as the URL address of the Web browser.
POINT
After changing the settings, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update screen is
clicked, the programmable controller is powered off and then on, or the CPU
module is reset.
Select this item to display the top page of the standard screen.
Select this item to display the specified user screen.
MELSEC-Q
Description
4 - 46