Mitsubishi Electric MELSEC Q Series User Manual page 525

APPENDICES
App - 21
1 When the above user parts are used on the module whose first 5 digits of serial No.
are 05111 or earlier, they operate with the initial values indicated above.
2 Be sure to set ELMNO1. Failure to do so will result in an error. Set ELMNO1 to
ELMNO64 consecutively. Failure to do so will result in an error.
3 Be sure to set LOWs, HIGHs and PICTUREs as many as the quantity specified at
RANGENO. Failure to do so will result in an error.
4 Be sure to set LOWs, HIGHs and CMTs as many as the quantity specified at
RANGENO. Failure to do so will result in an error.
5 Be sure to set ELMNOs as many as the graph lines specified at GRAPHNO. Failure
to do so will result in an error.
6 Be sure to set ELMNOs as many as the quantity specified at XNO. Failure to do so
will result in an error.
(c) Deletion of temporary Internet files
When the Web server module has been replaced, delete the temporary
Internet files (cache) and then make access to the Web server module.
(Refer to Section 6.2.7 (1) for how to delete the temporary Internet files.)
(2) Replacing a module with the first 5 digits of serial No. 11051 or
earlier with a module with the first 5 digits of serial No. 11052 or
later
(a) Restoration of setting information file
The setting information file of the module with the first 5 digits of serial No.
11051 or earlier can be restored to the module with the first 5 digits of serial
No. 11052 or later.
The setting information file of the module with the first 5 digits of serial No.
11052 or later cannot be restored to the module with the first 5 digits of
serial No. 11051 or earlier. (An error will occur if such restoration is
executed.)
(3) Replacing a module with the first 5 digits of serial No. 14021 or
earlier with a module with the first 5 digits of serial No. 14022 or
later
(a) Restoration of setting information file
The setting information file of the module with the first 5 digits of serial No.
14021 or earlier can be restored to the module with the first 5 digits of serial
No. 14022 or later.
The setting information file of the module with the first 5 digits of serial No.
14022 or later cannot be restored to the module with the first 5 digits of
serial No. 14021 or earlier.
MELSEC-Q
App - 21