Mitsubishi Electric MELSEC Q Series User Manual page 343

6 FUNCTIONS
[Before registration]
6 - 120
(e) Set functions supported by the Web server module used for the setting
information file. If set functions are not supported, they cannot be used.
(Refer to Appendix 5.1.)
(3) Operation procedure for CSV export/import function
Refer to the setting example in (4) for an entire sequence.
On Data management, export the setting data to the CSV file
(setting data file).
Transfer the setting data file to be edited to the personal computer via FTP.
Open the setting data file on spreadsheet software, etc., and edit it
according to the corresponding setting data file format.
Transfer the edited setting data file to the Web server module via FTP.
On Data management, import the setting data file.
Confirm that the portions edited on each setting screen of the
administrative menu have been changed correctly.
Delete the setting data file from the standard ROM or CompactFlash card.
[ ] indicates the setting item on Data management. (Refer to Section 6.10.4.)
(4) Setting example of CSV export/import function
(a) In this example, 50 tag components of tag setting No. 1 are registered.
The component settings No. 2 to 50 are newly registered to the tag setting
No. 1 where the component setting No. 1 has already been registered.
(Refer to Section 6.3.3 for tag setting.)
Start
Completed
MELSEC-Q
[CSV export]
Refer to Appendix 6
for the setting data
file format.
[CSV import]
[After registration]
6 - 120