6 FUNCTIONS
6.9.2 Address notification setting
Item
Notification IP address
Save
Cancel
6 - 109
[Setting Purpose]
1) In the IP address setting, set the IP address and HTTP port number of which
the external device will be notified by E-mail or FTP.
2) In the e-mail notification setting, set the destination e-mail address and
address notification timing when IP address notification is made by e-mail.
3) In the FTP notification setting, set the transfer destination FTP server when IP
address notification is made by file transfer.
[Start Procedure]
1) IP address setting (refer to (1))
[Administrative menu]
setting>> tab
2) E-mail notification setting (refer to (2))
[Administrative menu]
setting>> tab
3) FTP notification setting (refer to (3))
[Administrative menu]
setting>> tab
(1) IP address setting
Make IP address setting.
[Setting Screen]
[Setting Item]
Set the IP address and HTTP port of which the external device will be notified.
Saves the setting.
The settings are updated when the "Update" button on the Setting update screen is clicked, the
programmable controller is powered off and then on, or the CPU module is reset.
Discards the changed setting and returns to the previous setting.
"Address notification setting"
"IP address setting"
"Address notification setting"
"E-mail notification setting"
"Address notification setting"
"FTP notification setting"
Description
MELSEC-Q
<<IP address
<<E-mail notification
<<FTP notification
6 - 109