Mitsubishi Electric MELSEC Q Series User Manual page 234

6 FUNCTIONS
(a)
6 - 11
(1) Logging name
(a) Set the logging data to perform the logging monitor.
(b) Select the tag name set in the logging setting.
(Refer to Section 6.4.4 for the logging setting.)
(c) The Logging name drop-down list displays the setting No. and tag names of
the logging setting.
(2) Specified file
(a) Set the logging data file to perform the logging monitor.
(b) Select the file from the current file and saved files of the logging data
specified as the logging name.
(3) Display form
Select the display form of the logging monitor.
List : Logging data are displayed in list form.
Graph : Logging data are displayed in graph form.
(4) List
Logging data are displayed in list form.
(a) Data
The logging dates and times are displayed.
(Example) 2002/08/08 08:58:17
(b) Select the component to perform the logging monitor. (Up to four
components can be selected.)
(c) The values stored in the components are displayed.
MELSEC-Q
Present file
Saved file
(b)
(c)
6 - 11