Table of Contents
Advertisement
88/233
Bosch Rexroth AG | Electric Drives
Programming
Transferring a Value
Canceling Value Entry
Functional Keys in the Active Variables Editor
F-key level <F2>
<F3>
1. Level
File...
All
File
Open*
Variables *
Navigate
BoF
EoF
Edit online* Add a line
Delete a line Insert a line
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
The editing mode is indicated by a flashing entry cursor in the corresponding
cell.
An edited value can be transferred using one of the following actions:
●
Pressing the <Enter> key
– or –
●
Pressing the <Tab> key
– or –
●
Pressing an arrow key.
– or –
●
Clicking the mouse on another cell.
After the value has been transferred, the entered value is written directly to the
NC variable in the NC kernel.
If an incorrect value is entered, an error message is displayed in the
status line and the selected cell remains in the editing mode. The
entry can be cancelled or the value can be rewritten after correcting
the entry.
The editing mode can be cancelled at any time as follows:
●
Pressing the <Esc> key.
The original value is retained in the list.
Overview
The following table lists all the functions of the active variable editor:
<F4>
<F5>
Online
Navigate...
edit...*
Save*
Save as...* Print
*
This function is not available if all variables are shown, only after a var‐
iable list has been activated.
Fig.7-2:
Function keys in the variables editor
Functions on the Main Level
Overview
The following functions can be found on the 1st level of the F-key bar:
●
File
●
Navigate
●
Edit online...
●
Options
●
Exit var. editor
<F6> <F7>
<F8>
Options
Variables
Exit all var. editors
Save
<F9>
Exit var. editor
Exit edit mode
Advertisement
Table of Contents
