Definition Of Terms - Bosch Rexroth IndraMotion MTX 09VRS Manual

Application Description | Rexroth IndraMotion MTX 09VRS
Additive Value Entry (F5)
M-Keys in the Tool Editor
Next Tool (R8)
Previous Tool (L8)
8.2.6 Tool catalog

Definition of Terms

Fig.8-45: Message for save basic tool data
If the checkmark for "Always show this dialog box" is removed, this message
will no longer appear during the current interface session.
"Additive value entry" can be used to enter correction values that are to be
added to the existing value (see
F-key is a toggle key for switching between the two input modes "Additive" and
"Absolute".
In "Edit tool", separate M-key bars with the following functions are provided in
the default configuration:
This function is used to search the visible area of the tool memory in the tool
list for the next tool and then to show its data.
This function is used to search the visible area of the tool memory in the tool
list for the previous tool and then to show its data.
In "Add tool", empty M-key bars become active in the default configuration.
M-keys can be configured in the following files in IW Engineering:
Editor type
Edit tool
Add tool
Fig.8-46: M-key definitions in the tool editor
If these data are not contained in the project directory, "global" M-keys go into
effect.
The following illustration explains the terms
● Tool technology
● Tool type
● Tool class
Electric Drives | Bosch Rexroth AG
and Controls
chapter 8.2.1 "Value Entry" on page
M-key definition file
HMI.MKeys.ToolEditorLocalLeft.Visu.xml
HMI.MKeys.ToolEditorLocalLeft.xml
HMI.MKeys.ToolEditorLocalRight.Visu.xml
HMI.MKeys.ToolEditorLocalRight.xml
HMI.MKeys.ToolInsertEditorLocalLeft.Visu.xml
HMI.MKeys.ToolInsertEditorLocalLeft.xml
HMI.MKeys.ToolInsertEditorLocalRight.Visu.xml
HMI.MKeys.ToolInsertEditorLocalRight.xml
141/233
Tool Management
116). This