Table of Contents
Advertisement
162/233
Bosch Rexroth AG | Electric Drives
Diagnostics
10.4
NC-PLC Interface Signals
10.4.1
Application
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
Fig.10-17:
Detail view of a bus device
Change to detail view using <F9> or <ESC>. The <F6> and <F7> keys allow
branching to the log book or the diagnostics screen respectively.
You do not have to open the overview screen in order to move to the detail view
of a different slave. Instead, you can use the <P> key for the previous slave or
<N> for the next slave and scroll through the detail views of the bus devices.
The "Interface signals" display shows the status of all the input and output sig‐
nals of the internal interface between the NC and the PLC.
The signals are arranged according to the following signal groups:
●
Global signals
●
Channel signals
●
Axis signals
●
Spindle signals
The signals are arranged byte-wise within a group and displayed in plain text
(logical designation, description of the signal). Signals currently logically true
are displayed in an inverse (i.e. highlighted dark blue) manner.
Advertisement
Table of Contents
