Table of Contents
Advertisement
Application Description | Rexroth IndraMotion MTX 09VRS
Channel status
The status of the active NC
channel is shown as symbol
and text in this area.
Test mode
Channel settings
Channel in wait status
Ready
Running
Stop
Prepared
Malfunction
Inactive
Control reset
The symbol indicates that a channel-specific test function (dry run), test feeding and/
or test rapid traverse is active.
The signal indicates that the "Optional stop" function is active.
The signal indicates that the "Block skip (M01)" function is active.
Wait states that cannot be specified by a separate bitmap are displayed using this
bitmap.
This bitmap is also shown if more than one wait state has occurred. All wait states
that have occurred are displayed in the tool tip by moving the mouse over the symbol
or by pressing the F-key in the Channel dialog box.
Dwell time
Auxiliary function with acknowledgement obligation
Read lock
Channel feed = 0
Program stop (M0/M1)
Feed stop
Feed lock
Fig.5-1:
Display symbols
Electric Drives
| Bosch Rexroth AG
and Controls
General Operation and Visualization
27/233
Advertisement
Table of Contents
