Table of Contents
Advertisement
86/233
Bosch Rexroth AG | Electric Drives
Programming
7.2.9
Online Help: NC Programming Instructions
7.2.10
Interruption of the Connection
7.3
Variables Editor
7.3.1
Overview
Editor for Variables
Screen Layout
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
depending on the file size. The text editor's performance is better. It does not
have the following functions:
●
Graphic GNP NC programming
●
Syntax highlighting
●
No continuous automatic block numbering
●
Limited renumbering of NC programs
When NC programs are renumbered, jumps to block numbers are not de‐
tected. All NC blocks are renumbered.
●
Error handling
The error handling is restricted. The faulty parts of the program are marked
but not highlighted after opening the editor and when navigating to the
next/previous error. The change records of the document result in an up‐
date in the error list of the editor (no error deletion after modification of the
faulty line, no displacement of the error position after inserting/deleting
complete lines in front of a faulty line.
All other functions can be used.
The online help for the DIN programming instructions is retrieved using <F1>.
If the connection to the control system is interrupted, all NC Editors are closed.
If edited data have not been saved at this point in time, the files are saved on
the hard disk under the same name (including the path) in the directory "c:
\SaveXXXXXXXX". XXXXXXXX stands for the abbreviation of the current date
(year/month/day).
Example:
Save20050614 corresponds to the 14th of June 2005. After the connection has
been restored, the saved files can be copied to a mount directory of the control
system with the help of the Windows Explorer.
The variables editor can be used to display the following variables:
●
Permanent CPL variables (@)
●
System data (SD)
●
Structured variables (SV)
Structure
The variables editor consists of the columns name, value and comment.
Title line
The name of the variables editor and the list name, including the path specifi‐
cation, are displayed in the title line.
If the list of all active variables is displayed, the list name is "General list".
Advertisement
Table of Contents
