Table of Contents
Advertisement
Application Description | Rexroth IndraMotion MTX 09VRS
5.2.17
System Message Display
Display Contents
5.3
Two-Channel Display
5.3.1
Application
Integration of the Two-Channel Dis‐
play in IndraWorks Operation
Fig.5-22:
Program coordinates display
The System message display is used to show system messages.
Fig.5-23:
System message display
A display that is vertically divided shows process data and status information
for 2 selected channels.
The display thus allows the user to see 2 channels at once.
One channel is selected as the active channel, reacting to the use of F and M
keys.
The display is assigned to the operating mode <OP3> "Machine". The appli‐
cation is started by pressing <F8> "Additional functions" and <F9> "Two-
channel display".
The menu and the title line are hidden.
The display is an application which runs in parallel to the NC screen for a chan‐
nel.
It is possible to switch quickly between single-channel and two-channel display
by pressing <OP3> "Machine".
The functions of the F-keys depend on the NC operating mode and can be
configured in IndraWorks Engineering.
Electric Drives
| Bosch Rexroth AG
and Controls
General Operation and Visualization
39/233
Advertisement
Table of Contents
