Table of Contents
Advertisement
220/233
Bosch Rexroth AG | Electric Drives
Extended Functionality
Calculating the Cutting Velocity
Feed Calculations
Calculating the Feed
Calculating the Feed
Error
Error Causes
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
2.
Enter the diameter and the cutting velocity in the provided fields. In this
connection, expressions are allowed (see
order of the entry is of no importance.
3.
Initiate the calculation using the <return key> or by changing the focus.
4.
If conversion into the other metric system is necessary, activate "Metric
system Inch".
The cutting velocity can be calculated in the following way:
1.
Make sure that the metric system suitable for your entries is active. For
the Anglo-American metric system, "Metric system Inch" must be
checked.
2.
Enter the diameter and the speed in the provided fields. In this connection,
expressions are allowed. The order of the entry is of no importance.
3.
Initiate the calculation using the <return key> or by changing the focus.
4.
If conversion into the other metric system is necessary, activate "Metric
system Inch".
The feed can be calculated in the following way:
1.
Make sure that the metric system suitable for your entries is active. For
the Anglo-American metric system, "Metric system Inch" must be
checked.
2.
Enter the speed. If the speed is not known, it is to be calculated from the
cutting velocity. Refer to
3.
Enter the number of teeth 1 if you want to get the feed per rotation; oth‐
erwise, enter the number of teeth of the tool.
4.
Enter the feed speed.
5.
Initiate the calculation using the <return key> or by changing the focus.
6.
If conversion into the other metric system is necessary, activate "Metric
system Inch".
The feed speed can be calculated in the following way:
1.
Make sure that the metric system suitable for your entries is active. For
the Anglo-American metric system, "Metric system Inch" must be
checked.
2.
Enter the speed. If the speed is not known, it is to be calculated from the
cutting velocity. Refer to
3.
Enter the number of teeth 1 if you know the feed per rotation; otherwise,
enter the number of teeth of the tool.
4.
Enter the feed.
5.
Initiate the calculation using the <return key> or by changing the focus.
6.
If conversion into the other metric system is necessary, activate "Metric
system Inch".
Errors are caused in the entry of values and/or expressions. The following cau‐
ses can be considered:
●
Inadmissible mathematical operations,
●
Syntax errors and
●
exceedance of a value range.
Syntax for
Calculating the Cutting
Velocity/Speed.
Calculating the Cutting
Velocity/Speed.
Expressions). The
Advertisement
Table of Contents
