Table of Contents
Advertisement
130/233
Bosch Rexroth AG | Electric Drives
Tool Management
Sorting Tool List
Rexroth IndraMotion MTX 09VRS | Application Description
and Controls
Fig.8-22:
Selection box with sector/location to copy a tool
In the default configuration, the function can also be retrieved using menu func‐
tion Edit ▶ Copy tool.
The "Copy tool" function duplicates all data elements indicated in
the data scheme as tool data to an available location in the data‐
base table.
This function also exists as a PLC function.
The following settings dialog box can be used to configure and activate list
sorting according to 3 decreasingly prioritized sorting criteria. For multiline sort‐
ing columns within one sublist, the corresponding subline can be entered for
which it should be sorted. At the same time, this dialog box can also be used
to restore the original, "unsorted" list display.
Fig.8-23:
Settings dialog box for sorting the tool list
In the example, the tool list is sorted first according to the T-number, then ac‐
cording to the sector number and then according to the location number, each
in ascending order.
Advertisement
Table of Contents
