Stopping The Drive - ABB ACS5000 User Manual

Chapter 8 - Operation
8.7

Stopping the drive

8-12 (14)
Press the STOP key on the CDP control panel.
The motor stops according to the preset stop function and the drive stops
modulating. While the motor stops, the status line of the display shows
ReadyRef. The run status message blinks during the stop sequence.
1 L ->
StateINU
MOTOR SP
POWER
As long as the stop sequence is in progress, the drive can always be
restarted by pressing the START key on the CDP control panel.
Just before the motor will come to a standstill, the CDP control panel
displays shortly the message Stopping.
1 L ->
StateINU
MOTOR SP
POWER
When the drive has stopped modulating, the CDP control panel displays
ReadyRun.
1 L ->
StateINU
MOTOR SP
POWER
As long as the MCB has not been opened, the motor can be started again.
3BHS221906 ZAB E01 Rev. D
600.0 rpm
ReadyRef
300.00 rpm
20.0 kW
600.0 rpm 0
Stopping
0.00 rpm
0.0 kW
600.0 rpm 0
ReadyRun
0.00 rpm
0.0 kW
ABB
5k A UM