Installing The Cabinet - ABB ACS5000 User Manual

ABB
5.6

Installing the cabinet

5k A UM
The drive and integrated transformer are delivered in separate transport
units. The units are joined and fixed to the floor at the installation place.
After a transport unit has been positioned in the final location, do the
following:
• Check the cabinets for misaligned doors and any gaps between
cabinet walls and cabinet frame.
To check the horizontal and vertical position of the transport unit, use
a spirit level.
NOTICE
It is important that the cabinets are not buckled and that the roof plates are
level. Otherwise the fan units cannot be installed properly. Improper instal-
lation may affect the cooling.
If the floor proves to be not level and the incline cannot be corrected,
place shims or leveling plates under the base frame to adjust the posi-
tion of the transport unit.
• To fix joining surfaces with each other, remove the back walls of the
adjoining transport units. The doors do not have to be removed.
Fix the transport units with each other all around the joining surfaces.
Supplied screws:
Item
Hexagon head screw
3BHS221906 ZAB E01 Rev. D
Chapter 5 - Mechanical installation
Type Identification
M6x20 3ABD00012503
5-3 (4)