ABB
Chapter 6 - Electrical installation
6.1
Safety
6.2
Overview of installation work
6.3
Cables requirements
Power cables
Auxiliary and
control cables
5k A UM
WARNING
Hazardous voltage!
Improper work could lead to life-threatening injury or death.
The electrical installation must be carried out by qualified personnel
according to the site and equipment requirements, and the relevant
electrical codes.
When the electrical installation is completed, the main and auxiliary power
supply to the drive must not be switched on without the consent of the ABB
commissioning personnel.
Take appropriate measures to prevent main and auxiliary power supply
being switched on during installation.
The electrical installation includes the following wire and cable
connections:
■
Power cables, ground cables, equipotential bonding conductor
■
Auxiliary power, control and serial communication cables
■
Power supply cables for fan units
■
Transformer heating cable
For information on the requirements for power cables, ground cable and
equipotential bonding conductor, see:
■
ACS5000 power cable specification
■
Power cables engineering guideline
For information on the requirements for the auxiliary power cable and the
control cables, see
Auxiliary power and control cables guideline.
3BHS221906 ZAB E01 Rev. D
6-1 (22)