Chapter 8 - Operation
8.8.3
Starting the drive after an emergency-off
8-14 (14)
1
To start the drive after an emergency-off reference value, unlatch the
EMERGENCY-OFF pushbutton.
2
Turn the EMERGENCY-OFF pushbutton into the direction indicated
by the arrows on the pushbutton to return the pushbutton to its initial
position.
3
Press the RESET key on the CDP control panel to cancel the emer-
gency-off message on the display.
4
To reset the emergency-off safety relay of the drive, press the EMER-
GENCY-OFF RESET pushbutton.
After resetting, the status message of the drive changes to ReadyOn.
1 L ->
StateINU
MOTOR SP
POWER
The main power supply can be connected to the drive, and the drive can
be started again.
3BHS221906 ZAB E01 Rev. D
0.0 rpm
ReadyOn
0.00 rpm
0.0 kW
ABB
5k A UM