Connecting The Cables - ABB ACS5000 User Manual

Chapter 6 - Electrical installation
6.8.6

Connecting the cables

I/O stations
Fieldbus interface
(option)
6-18 (22)
• Connect the cables for the standard I/O station
intermediate terminals
• Connect the cables for the optional I/O station
to the terminals of the I/O modules.
Fig. 6-15 Terminals inside control compartment
• Connect the serial communication cable directly to the fieldbus
interface.
If a twisted pair cable is used, leave the unscreened cable ends as
short as possible.
• Connect the individual cable screens to the PE terminals.
3BHS221906 ZAB E01 Rev. D
(Fig. 6-15: 2).
3
2
1
ABB
(Fig. 6-15: 1) to the
(Fig. 6-15: 3) directly
5k A UM