Door Handles; Visual Checks On The Drive - ABB ACS5000 User Manual

Chapter 10 - Preventive and corrective maintenance
10.6.7

Door handles

10.6.8

Visual checks on the drive

10-28 (36)
Fig. 10-10 Pivoted door handle
To open a door:
1 To release the door handle, insert and turn the key to the right. The
door handle pops out.
2 To open the door, turn the door handle
• to the right if the door is hinged on the right,
• to the left if the door is hinged on the left.
3 To lock the door, bring the door handle in line with the door plate and
press the handle down until it clicks in.
Check the drive and its immediate vicinity visually at the intervals stated in
the maintenance schedule and pay attention to the following items:
■ Humidity inside the drive
■ Permitted range of ambient air temperature and humidity of the drive
■ Dust built-up inside the drive
■ Appropriate fastening of cables and wires and connections of cable
shields and screens
■ Integrity of cable insulation
■ Signs for overheated components, wires, cables or busbars
■ Corrosion on circuit boards, connectors or busbars
■ Correct type of signal and power cables
For information, see the applicable cable specifications.
3BHS221906 ZAB E01 Rev. D
ABB
5k A UM