General information on manual and equipment
Structure of the user documentation
2 (8)
If information is required beyond the instructions in this manual, refer the
matter to ABB.
The complete set of user documentation of a standard drive consists of
this manual and supplementary documentation that is provided in the
following appendices:
■
Appendix A - Additional manuals
The appendix provides manuals about additional equipment deliv-
ered with the drive (eg, project specific options such as pulse encoder
or fieldbus interfaces), or information on modifications of the standard
drive.
■
Appendix B - Technical data
The appendix contains the technical data sheets of the drive.
■
Appendix C - Mechanical drawings
The appendix provides the outline drawing(s) of the drive. The draw-
ings are generated according to the customer-specific project.
■
Appendix D - Wiring diagrams
The appendix contains the circuit diagrams with information on cross-
reference and device-identification conventions. The diagrams are
generated according to the customer-specific project.
■
Appendix E - Parts list
The parts list is produced for each project and contains all information
to identify a component.
■
Appendix F - Test reports and certificates
The appendix provides the test reports of the drive. Quality certifi-
cates, and codes and standards the drive complies with are added if
required for the project.
■
Appendix G - Signal and parameter table
The
Signal and parameter table
signals, control and status words, and control parameters and their
default settings.
3BHS221906 ZAB E01 Rev. D
includes descriptions of actual
ABB
5k A UM