ABB
6.10
Transformer heating cable
5k A UM
The heating cable inside the terminal compartment of the drive and the
extension into the cabinet of the integrated transformer have been
installed in the factory. The heating cable inside the drive cabinet has been
installed in the factory and does not require any installation work.
•
Connect the two cables
cabinets.
The connectors are accessible either from the back of the cabinets,
when the back walls have been removed, or from the front of the cabi-
nets.
If only front access is possible, it is recommended to make the
connection before the power cables are installed.
1
Fig. 6-19
Heating cable connection
3BHS221906 ZAB E01 Rev. D
Chapter 6 - Electrical installation
(Fig. 6-19: 1, 2)
at the shipping split of the two
2
6-21 (22)