Chapter 9 - CDP control panel
9.6.3
Enabling / unlocking a parameter lock
Enabling the
parameter lock
Unlocking the
parameter lock
9.7
Functions mode
9.7.1
Overview
9-16 (24)
Unwanted parameter entry can be prevented by activating the parameter
lock function.
The corresponding parameters are 16.02 PARAMETER LOCK and 16.03
PASSCODE and belong to parameter group 16 SYSTEM CTRL INPUTS.
1
Select parameter 16.02.
2
Set parameter 16.02 to 1 (LOCKED).
3
Confirm the setting and exit the parameters mode.
1
Select parameter 16.03.
2
Set the correct pass code.
3
Confirm the setting and exit the parameters mode.
For further information, see
The functions mode is used to set the display contrast.
0.0 rpm
1 L ->
UPLOAD
<= <=
DOWNLOAD
=> =>
4
CONTRAST
3BHS221906 ZAB E01 Rev. D
Appendix G – Signal and parameter
1
Status line
2
Selectable functions
3
Selects the functions mode
4
Selects the line
5
Acknowledges the selection
1
2
3
4
5
ABB
table.
5k A UM