Fig. 6-4 Preparing Power Cables For Sealing Modules - ABB ACS5000 User Manual

Chapter 6 - Electrical installation
Preparing cables for cable entries with sealing modules
1
2
3
4
6
7
10
11
1 Outer cable sheath
2 Sealing module
3 Frame
4 Conductive foil of sealing module
5 Cable sheath removed to expose cable shield
6 Cable clamp
7 Shrinkable sheath seal
8 Shield extension to be connected to PG busbar
9 Cable screen extension to be connected to the PG busbar
10 Heat-shrinkable termination
11 Cable lug as specified by the cable supplier and suitable for M12 bolt
12 Sheath seal
Fig. 6-4 Preparing power cables for sealing modules
6-8 (22)
• Prepare cables with an outer cable screen or shield for EMC bonding
with the metal enclosure of the cabinet as illustrated in
• Install the sealing modules according to the instructions of the sealing
module supplier.
3BHS221906 ZAB E01 Rev. D
5
12
8
9
ABB
Fig. 6-5.
5k A UM