ABB ACS5000 User Manual page 150

Chapter 10 - Preventive and corrective maintenance
Name
EXT Off
Green
Blinking green
Red
Blinking red
SD Off
Green
Blinking green
Yellow
Blinking yellow
Blinking yellow
Red
Blinking red
Off
PNL 1/
PNL 2
Green
Blinking green
Yellow
Red
Blinking red
10-14 (36)
Color
No NEXA-21 connected
NEXA-21 found and initialized
NEXA-21 support is being initialized (when the remote
monitoring tool boots up)
NEXA-21 malfunctions
NEXA-21 not supported
No SD/SDHC card
Card attached and taken into use
Card attached and initialization in progress
Card can be safely removed
Card attached, removal in progress
Together with the blinking red STAT LED: System waits for
confirmation of reboot operation or network override
Card error, for example write protection prevents from writing
data to the card
Card initialization failed.
Unsupported card type, for example, SDXC (extra capacity)
cards and MMC cards are not supported.
No devices (no wire) connected to the PNL port
All devices connected, identified and commissioned
Manual or automatic discovery of devices in progress
Communication OK, but device connectivity limited.
All devices are ready to be unplugged/disconnected.
Communication error caused the panel port network
initialization to fail.
Unknown device in the network, or something is interfering the
network and preventing proper detection of monitored devices.
Unsupported device is found in the network, or there are too
many devices in the network to be monitored
3BHS221906 ZAB E01 Rev. D
Function
ABB
5k A UM