Operational Commands; Setting The Direction Of Rotation - ABB ACS5000 User Manual

Chapter 9 - CDP control panel
9.9

Operational commands

9.9.1

Setting the direction of rotation

9-22 (24)
For instructions on how to start and stop the drive system from the CDP
control panel, see 8.6 Starting the drive
Setting the direction of rotation from the CDP control panel is possible in:
■ Local control mode L
■ Remote control mode R
The arrow on the display indicates the direction of rotation:
■ When the motor is running, the arrow indicates the actual direction.
■ When the motor is not running, the arrow indicates the preselected
direction.
To set the direction of rotation, press the FORWARD or BACKWARD key.
If you change the direction while the motor is running, the motor
automatically ramps down to zero speed and reaccelerates in the opposite
direction to the preset speed. The arrow changes at zero speed.
3BHS221906 ZAB E01 Rev. D
and 8.7 Stopping the
1 L -> 600.0 rpm
ReadyRun
StateINU
600.00 rpm
MOTOR SP
POWER 75.0 kW
600.0 rpm
1 L <-
ReadyRun
StateINU
MOTOR SP 600.00 rpm
POWER 75.0 kW
ABB
drive.
5k A UM