ABB
9.4
Identification mode
5k A UM
When the power supply is switched on, or the CDP control panel is
connected to the drive and the auxiliary voltage has been switched on
already, the identification display appears showing the CDP control panel
version and then the ID number of the drive. When the CDP control panel
is initialized, the display changes as follows:
CDP312 PANEL V5.30
........
After 2-3 seconds, information on the drive
in use (3), and the drive identification
ACS 5000 xxxx
<
Device Name >
LDAI5500
ID-NUMBER 1
After another few seconds:
1 L ->
InitSeq....
StateINU
MOTOR SP
POWER
3BHS221906 ZAB E01 Rev. D
(4)
is displayed.
0.0 rpm
0.00 rpm
0.0 kW
Chapter 9 - CDP control panel
(1,
2), the application software
1
2
3
4
9-3 (24)