Mitsubishi Electric MELSEC-Q Series User Manual page 115

Item
Display of network map and error status
1)
Display of disconnected cable and
disconnected station
Display of selected station status and
error details
2)
Slave station number setting
Communication Test
IP Communication Test
3)
Cable Test
Link Start/Stop
Network Event History
4) Reserved Station Function Enable
Enable/Disable Ignore Station Errors
System Monitor
5)
Remote Operation
: Diagnosed
: Diagnosed with restrictions
: Not diagnosed
(Note-1): The range from the station No.1 to 4 is valid in the 4-axis module, and the range from the station No.1 to 8 is valid in the 8-axis
module.
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
Available/Not available
9 - 3
Restrictions
The icon of the servo amplifier displays "Other
Modules".
–
This item is not displayed when the selected
module does not support "Selected Station
Communication Status Monitor" of GX
Works2.
–
Invalid because the communication test is not
supported.
Invalid because the IP communication test is
not supported.
Invalid because the cable test is not
supported.
Invalid because the station No.1 to 16
cannot start/stop data link.
–
Invalid because the station No.1 to 16
cannot set reserved stations.
The operation of setting/canceling is invalid.
–
Only "RESET" operation is supported.
Reference
Section 9.3
–
–
–
(Note-1)
Section 9.4
Section 9.5
(Note-1)
Section 9.6
–
Section 12.2
Section 9.7