Mitsubishi Electric MELSEC-Q Series User Manual page 75

(e) Parameter processing of a slave station
[CC IE Field Configuration] after selecting the module in the station list area
[Parameter Processing of Slave Station]
The parameters of a slave station can be set or read. This can be performed when the
slave station supports the parameter process.
The setting range varies depending on the target module. For details, refer to the manual
for the slave station used.
(f) Command execution of a slave station
[CC IE Field Configuration] after selecting the module in the station list area
[Command Execution of Slave Station]
The command of a slave station is executed. This can be performed when the slave
station supports the command execution.
The setting range varies depending on the target module. For details, refer to the manual
for the slave station used.
Chapter 7 PARAMETER SETTING
7 - 15