Mitsubishi Electric MELSEC-Q Series User Manual page 124

Item
Network map
Network Status
Disconnected
station monitor area
Chapter 9 CC-LINK IE FIELD NETWORK DIAGNOSTICS
Note that, in the following cases, the network map that is different from the actual system
configuration is displayed.
• Two stations are connected through a switching hub.
Branches are not displayed in the network map.
Actual system configuration
GX Works2
Master station
(Station No.0)
Switching hub
Network map
• Switching hubs are in cascade connection.
Only one branch is displayed.
Actual system configuration
Master station
GX Works2
(Station No.0)
Intelligent device
station (Station No.17)
Network map
Displays a disconnected station that has been set in the network configuration settings but has not
yet performed data link. However, even if a disconnected station had performed data link, it is
displayed in this area in the following cases.
• A station that was reconnected to a network after cable disconnection/insertion or power-off and
power-on of the system and remains disconnected
• A disconnected station with the station icon deleted in the network map by clicking the [Update...]
button
The icon indicates a station that has not yet performed data link.
Icons other than indicate stations that had performed data link before disconnection.
9 - 12
Description
Switching hub
Intelligent device
station (Station No.18)
Intelligent device
station (Station No.19)
Disconnected station
monitor area
Intelligent device station
(Station No.17)
Switching hub
Intelligent device
station (Station No.20)