Mitsubishi Electric MELSEC-Q Series User Manual page 180

Sequence scan
Start contact
Read completion device
(Device specified in (D2))
Own station CPU
Read completion device
(Device of (D2)+1)
Setting data
(Information specified in
(n3), (n4), (N5))
REMFR/REMTO instruction
execution status
(SW0080 to SW009F))
Simple Motion module
(3) Error
When a dedicated instruction fails, error details can be checked by any of the following
methods:
(a)
(b)
• When failed
REMFR
0 END
In GX Works2
Error details can be checked using CC-Link IE Field Network diagnostics. (Refer
to Chapter 9.)
By devices
Completion status indication device ((D2)+1) is turned on and an error code is
stored in Execution status (REMFR/REMTO) (SW0080 to SW009F).
According to the error code, check the error details and take a corrective action.
(Refer to Section 12.5.)
Chapter 10 DEDICATED INSTRUCTIONS
0 END
Channel 1
Error
10 - 42
0 END 0 END
1 scan
Error code
0 END