POINT
If data link cannot be performed even though no error is indicated in the "System
Monitor" window, select the Simple Motion module, and click the [Diagnostics]
button. (Refer to (b).)
(a)
Checking for error in modules other than the Simple Motion module
1) Select a module other than the Simple Motion module in the "System Monitor"
window, and click the [Diagnostics] button.
The window corresponding to the module will open. (The CPU module is
selected in the illustration below.)
If the [Diagnostics] button is not supported by the module, click the [Detailed
Information] button.
When data link cannot be performed even though no failure is shown in
"System Monitor", select the Simple Motion module and click the [Diagnostics]
button.
12 - 3
Chapter 12 TROUBLESHOOTING