Mitsubishi Electric MELSEC-Q Series User Manual page 79

Item
Equally assign link devices to stations with preset
conditions.
[Equal Assignment]
(1) Start Station
button
(2) End Station
(3) Start No.
(4) Total Points Assigned
Assign the same link device points to all stations.
Enter the points in the field right next to the [Identical
Point Assignment] button.
[Identical Point
Assignment]
button
Points entered in this field will be reflected to the
"Points" of "RX/RY Setting".
Half of the points entered in this field will be reflected
to the "Points" of "RWw/RWr Setting".
(3) Setting example
Description
Enter the start station number of stations for which
link devices are equally assigned.
Enter the end station number of stations for which
link devices are equally assigned.
Enter the start number of link devices to be equally
assigned.
Enter the total points of link devices to be equally
assigned.
For setting examples, refer to Chapter 11.
Chapter 7 PARAMETER SETTING
Setting range
• Start Station: 1 to the end station
number
• End Station: Number set to "Start
Station" to the end station number
• Start No.: Same values set in "RX/RY
Setting" and "RWw/RWr Setting"
• Total Points Assigned: Same values
set in "RX/RY Setting" and
"RWw/RWr Setting"
(Default: Blank)
Set in increments of 16 points.
7 - 19
Remark
–
–