Mitsubishi Electric MELSEC-Q Series User Manual page 271

Function
Communications within the same
network
Communications with different
networks
Function
Loopback function
Submaster function
Function
Hardware test
Diagnostics of
module alone
Self-loopback test
Loop test
Own network
diagnostics
Cable test
Communication
Other network test
diagnostics
IP communication
test
Function
Reserved station specification
Temporary cancel of the reserved
station setting
Error invalid station and temporary
error invalid station setting
Interrupt request to a CPU module
IP packet transfer function
2) Transient transmission
Description Simple Motion module
Dedicated READ, SREAD, WRITE,
instruction SWRITE, REMFR, REMTO
- Not supported
3) RAS functions
Description
Simple Motion module
- Not supported
- Not supported
4) Diagnostic function
Description Simple Motion module
- Not supported
- Not supported
- Not supported
- Not supported
- Not supported
- Not supported
5) Other functions
Description
Simple Motion module
Target station Station No.17 to 120
Target station Station No.17 to 120
- Not supported
RX:0 to 1FFFH
RY:0 to 1FFFH
Device code, RWw:0 to 3FFH
Device No. RWr:0 to 3FFH
SB:0 to 1FF
SW:0 to 1FF
- Not supported
Appendix - 35
Specifications
QD77GF
READ, SREAD, WRITE,
SWRITE, SEND, RECV,
RECVS, REQ, REMFR,
REMTO, RIRD, RIWT,
Specifications
QD77GF
Specifications
QD77GF
Specifications
QD77GF
Appendices
Master/local module
QJ71GF11-T2
CCPASET
Supported
Master/local module
QJ71GF11-T2
Supported
Supported
Master/local module
QJ71GF11-T2
Supported
Supported
Supported
Supported
Supported
Supported
Master/local module
QJ71GF11-T2
Station No.1 to 120
Station No.1 to 120
Supported
RX:0 to 3FFFH
RY:0 to 3FFFH
RWw:0 to 1FFFH
RWr:0 to 1FFFH
SB:0 to 1FF
SW:0 to 1FF
RECVS instruction
Supported
Reference
Chapter10
-
Reference
-
-
Reference
-
-
-
-
-
-
Reference
Section 8.5
Section 8.5
-
Section 8.5
-