Simple Motion Modules - Mitsubishi Electric MELSEC-Q Series User Manual

1.2 Simple Motion Modules

A Simple Motion module is used to connect a servo amplifier or a MELSEC-Q series
programmable controller to CC-Link IE Field Network.
The module works as a master station on CC-Link IE Field Network.
(1) Synchronous communication function
(2) Coexistence system of I/O module and driver
Simple Motion module
A slave station which supports the synchronous communication function operates
synchronously with the operation cycle of Simple Motion module. The operation timing
of multiple slave stations can be synchronized. (A slave station which synchronizes with
a Simple Motion module supports the synchronous communication function. A slave
module which does not support the synchronous communication function is also
connectable.)
Simple Motion module Slave station
(Synchronous
communication
function:
Supported)
The coexistence system of servo amplifiers and I/O modules can be configured. The
network between drivers and I/O modules can be wired by a single line, and it enables
wire saving.
Chapter 1 CC-LINK IE FIELD NETWORK
Slave station
(Synchronous
communication
function:
Supported)
Drivers
1 - 4
Slave station
(Synchronous
communication
function:
Not supported)
I/O modules