Setting In The Master Station - Mitsubishi Electric MELSEC-Q Series User Manual

11.2.2 Setting in the master station

Connect GX Works2 to the master station and set parameters.
Master station (Station No.0)
Setting
1) Create a project using GX Works2.
Select "QCPU (Q mode)" in "Series" and "Q10UDH" in "Module".
[Project] [New]
2) Open the network parameter window and set parameters as follows.
Project window
IE/MELSECNET]
[Parameter] [Network Parameter]
11 - 5
Chapter 11 PROGRAMMING
Intelligent device station (Station No.17)
[Ethernet/CC