Mitsubishi Electric MELSEC-Q Series User Manual page 69

(1) Setting on the graphical window (CC IE Field configuration window)
1) Select the checkbox next to "Set the network configuration setting in the CC IE
Field configuration window". (Refer to Section 7.2.)
2) Configure the network setting. (Refer to Section 7.3.)
3) Open the setting window.
Project window
[Ethernet/CC IE/MELSECNET]
4) Select the module under "Module List" and drag and drop it to the station list area
or the device map area.
The slave station is added to the station list area. The added module is displayed
in the device map area.
5) Configure the remaining settings.
6) After the setting is completed, close the window.
[CC IE Field Configuration]
REMARK
For how to operate the setting window, refer to the following.
GX Works2 Version1 Operating Manual (Common)
List of stations
Configuration
of the
devices
[Parameter] [Network Parameter]
[CC IE Field Configuration Setting] button
[Close with Reflecting the Setting]
Drag and drop the text.
7 - 9
Chapter 7 PARAMETER SETTING