Mitsubishi Electric MELSEC-Q Series User Manual page 83

(2) Checking method
1) Click the [Assignment Image] button in the "Network Parameter -
MELSECNET/CC IE/Ethernet Module Configuration" window to open the
"Assignment Image" window. (Refer to Section 7.3.)
2) Select the devices to be checked and the magnification ratio in the window.
1) Click
2) Set
"Device (PLC side)",
"Device (Link side)", and
"Display magnification".
3) The assignment
image is displayed.
3) A red part in the device of the CPU module indicates that the device range
overlaps with the device range set for other refresh parameters. Correct the
refresh parameters.
POINT
The link devices of the Simple Motion module can be accessed from a program.
(Refer to Section 8.3.3.)
Chapter 7 PARAMETER SETTING
7 - 23