8.3.3 Direct access to link devices
Direct access to each link device (RX, RY, RWr, RWw, SB, or SW) of the Simple Motion
module is possible from the program. Specify a link device as the link direct device (J \ ) for
direct access.
(1) Specification method
(Example)
J1\Y1000
J1\X1100
Send
request
MOV K20 J1\W100
= J1\W2100 K300
Specify the network No. and the link device of the Simple Motion module for reading or
writing. Do not access outside the device range that is described below.
J
Remote input (RX)
Remote output (RY)
Remote register (RWw)
Remote register (RWr)
Link special relay (SB)
Link special register (SW)
Network No.
CPU module
X
Y
Actual I/O
W
Network No.1
Master station
Simple Motion
module
RX
RY
RY1000 RY1000
RX1100
RX1100
RWr RWw
RWw100 RWw100
RWr100
RWr100
8 - 8
Chapter 8 FUNCTIONS
X0 to X1FFF
Y0 to Y1FFF
W0 to W3FF
W400 to W7FF
SB0 to SB1FF
SW0 to SW1FF
1 to 239
Slave station
Slave station
RX
RY
RWr RWw
Cyclic transmission