Replacing The Rear Bezel - Toshiba Infinia 7130 Series Maintenance Manual

Replacing the Rear Bezel

To replace the computer's rear bezel, perform the following procedure and refer to Figure 4-
9.
1. If removed, replace the left-side panel (refer to section 4.2.6.).
2. Insert the tabs on the left side of the rear bezel into the latches on the rear edge of the
left-side panel.
3. Push the right side of the bezel forward until the bezel snaps in place.
4. Connect the power cord and all external cables to the computer and turn on the power.
Infinia™ Series Maintenance Manual --------------------------------------------------------- 4-129