Toshiba Infinia 7130 Series Maintenance Manual page 99

Procedure 3
Procedure 4
Procedure 5
Procedure 6
Procedure 7
Procedure 8
Procedure 9
Procedure 1
The purpose of this procedure is to determine if the InTouch™ Module is damaged or
defective. To perform this procedure, complete the following instructions, then begin with
Check 1 and continue as directed.
Verify that the InTouch ™ Module drivers are properly configured.
Verify that InTouch ™ Module applications have been activated.
Verify that the InTouch ™ Module cable is properly connected to the USB port in
the rear of the computer.
Check 1 Test the InTouch™ Module for proper operation.
If the InTouch ™ Module operates properly, perform Check 2. If the Module
does not operate properly, perform Procedure 2.
Check 2 Test the InTouch™ Module Remote Control for proper operation.
If the Remote Control operates properly, perform Check 3. If the Remote
Control does not operate properly, perform Procedure 3.
Check 3 Determine if the original problem still exists.
If the original problem still exists, perform the Problem Definition Process. If the
original problem no longer exists, perform the Repair Completion Process.
Infinia™ 7130, 7160, and 7200 Maintenance Manual ---------------------------------------- 3-92
Remote Control Button Operation Check
Sleep Button Operation Check
CD-ROM Player Button Operation Ch e ck
Telephone/Answering Machine Button Operation Check
TV/Radio Button Operation Check
Remote Control Replacement Check
InTouch™ Module Replacement Check
InTouch™ ™ Module Operation Check