Replacing The Mouse; Monitor; Removing The Monitor; Replacing The Monitor - Toshiba Infinia 7130 Series Maintenance Manual

Replacing the Mouse

To replace the mouse, align the mouse cable connector with the mouse port (color-coded
green) in the rear of the computer. Adjust the connector so that the pins on the connector
align with the holes in the port. Push the connector into the port. Restore power to the
computer.

Monitor

This section covers the removal and replacement of the monitor.

Removing the Monitor

To remove the monitor, turn off power to the computer and disconnect the monitor cable
connector from the video port (color-coded yellow) in the rear of the computer. Disconnect
the optional speaker cable from the line out jack (color-coded blue) in the rear of the
computer. Disconnect the optional microphone cable (color-coded read) from the
microphone jack in the rear of the computer. See Figure 4-34.
Figure 4-34 Removing and Replacing the Monitor

Replacing the Monitor

To replace the monitor, align the monitor cable connector with the video port (color-coded
yellow) in the rear of the computer. Adjust the connector so that the pins on the connector
align with the holes in the port. Push the connector into the port. Tighten the connector
screws until you feel tension. Plug the optional speaker cable into the line out jack (color-
coded blue) in the rear of the computer. Connect the optional microphone cable (color-coded
red) from the microphone jack in the rear of the computer. Restore power to the computer.
Infinia™ Series Maintenance Manual --------------------------------------------------------- 4-160