Removing The Front Bezel Door - Toshiba Infinia 7130 Series Maintenance Manual

Removing the Front Bezel Door

To remove the computer's front bezel door, perform the following procedure and refer to
Figure 4-13.
1. Turn off power to the computer, then disconnect the power cord and all external
cables connected to the computer.
2. Open the door, using the front bezel's door latch, to an angle of about 30°.
3. Facing the front of the computer, push the left-hand side of the door toward the hinges
until the top and bottom hinges separate from their hinge pins.
Figure 4-13 Removing and Replacing the Front Bezel Door
Infinia™ Series Maintenance Manual --------------------------------------------------------- 4-135