Epson RC520 Manual page 142

Maintenance 2. Regular Maintenance Inspection
Restore a project
Follow the steps below to restore the backed-up project.
(1) Select the [Open] command in the [Project] menu to open the [Open Project] dialog.
(2) Select the drive where the backed-up project is stored in the [Select Drive] box and
NOTE
(3) Select the [Save As] command in the [Project] menu to open the [Save Project As]
(4) Select the "C drive" in the [New Project Drive] box.
(5) Enter a project name for the [New Project Name] box.
(6) Click the <OK> button.
NOTE
The currently open project is the project stored in the C drive.
128
open the backed-up project.
The currently open project is the backed-up project stored in the drive you select in
the [Select Drive] box.
dialog.
RC520 Rev.7